Flame Effects Operator Practice Test

These questions are part of the practice quiz. Start practicing

• Which item concerns maintaining clearance around combustibles?
• What function does a gas train with regulators serve in a flame effects ignition system?
• What is the purpose of gas detection systems in flame effects?
• If a safety interlock test is skipped before a performance, what risk arises?
• What is the maximum allowable surface temperature in Celsius for exposed skin due to incident radiation from a flame effects display?
• Before ignition, how should gas leaks be verified as cleared?
• The complete assembly of components and devices that controls and generates a flame effect is known as which term?
• What is the primary purpose of supervisory oversight during flame effects setup?
• An individual or group flame effect designed for unattended operation outside any structure; automatic controls included?
• What should be included in a pre-show safety briefing for flame effects?
• What is the term for the sequence of control system functions to establish a source of ignition that must be completed and verified immediately before firing?
• Why is it important to conduct a leak test after installation of a flame effect system?
• A flame effect defined as the combustion of solids, liquids, or gases to produce phenomena before an audience.
• For the emergency stop, which statement best reflects the manual reset requirement?
• Which term describes the sequence of control system functions for establishing a source of ignition that must be complete and verified immediately before firing the flame effect?
• Which organization provides guidance on theatrical flame effects safety and practice?
• Which term defines a person who is active in a performance during which pyrotechnics are used and who is not part of the audience or support personnel?
• What is the significance of a "barrier zone" around flame effects?
• Which term is defined as a plan containing controls with sensors directly responsive to ignition device attributes necessary for the safe operation of the flame effect?
• What is the role of barriers and flame curtains around outdoor flame effects?
• Which term describes a live performer active in a pyrotechnic performance who is not part of the audience?
• What is a common cause of flame instability or misignition in a flame effect system?
• An installation of flame effects with a governing use permit duration of 180 days or less within a 12-month period is known as what?
• Which component is the control device that confirms flame presence in a flame effect appliance?
• What is the recommended approach to working near flammable props or set pieces?
• Which item is typically included in site plans for flame effects operations?
• Which term is described as a description of performance derived from testing or evaluation that guides appropriate selection, installation, and use of equipment that is not listed?
• In the outdoor flame effects design plan, which item is included to address hazards to people?
• Which term refers to the plan that presents the design criteria and/or assumptions used in the design along with complete design information for a flame effect appliance?
• What term describes an ignition system that ignites fuel without a pilot?
• Who is the single person with overall responsibility for flame effect operations and safety?
• Which of the following combines the steps to verify fuel and air pressures before a show?
• A flame effect that is used in combination with a pyrotechnic material or device.
• What is a risk associated with using open-flame effects near wooden stage elements?
• In the outdoor design plan, which concept addresses unauthorized access risk?
• Which statement best describes the purpose of interlocks in a flame effects system?
• Name three types of PPE essential for flame effects operators.
• Which term refers to an individual who is not a performer or member of the audience?
• In the event of a flame failing to ignite on command, what is the correct immediate action?
• A state or attribute of a system such that every single point failure results in all controlling parts of the system being disconnected from all sources of power and stored energy at the primary disconnect point.
• Which ignition method uses a standing flame to light the main burner?
• Which practice best minimizes thermal strain on rigging during flame effects installation?
• What does AHJ stand for in the context of flame effects safety?
• How should you use redundancy in critical flame effect systems?
• Which term describes the safe shutdown of the flame effect in the event of actuation of any flame effect primary safety control or limit switch?
• Where should one of each extinguisher be placed for a temporary installation?
• A flame effect that is operated manually without the use of an automatic control system.
• FEO stands for which term in flame effects terminology?
• What is the purpose of purging gas lines before ignition?
• If a weather-related safety issue is detected during an outdoor run, what action should be taken?
• Which flame effect classification corresponds to a large flame effect that is permanently installed inside or outside a structure designed for unattended operation without a main show supervisory control system?
• What is the final set of control system functions that must be verified to be in a specific control mode immediately before arming and firing of the flame effect?
• Why is proper gas regulator sizing important in flame effects?
• What documentation should be carried on site at all times for flame effects operations?
• Which term describes flame effects that are designed to move or be moved during operation or installation?
• What does the acronym PLC stand for in flame effects control systems?
• Interlocks shall be provided in the control system and must be which of the following?
• Define backflow prevention in the context of flame effects gas lines.
• An installation of flame effects with a governing use permit lasting longer than 180 days corresponds to which term?
• Which term is the valve used to control the flow of fuel into an accumulator?
• During post-installation checks for a flame effect system, what is the main safety objective of performing a leak test?
• What is the minimum age requirement for attendants and assistants in a flame effects operation?
• Which factor is explicitly listed as part of the outdoor flame effects design considerations?
• Which term describes a container or piping that holds a predetermined volume of fuel for a flame effect?
• What term refers to any solid, liquid, or gas fuel, or combination thereof, that requires the addition of oxygen to ignite and maintain combustion?
• Why is rehearsal with the actual flame system essential?
• How should a flame effects operator handle an unexpected weather change during an outdoor run?
• What is the recommended maintenance practice to minimize soot and keep flames clean?
• The control operator that is manually actuated by the operator prior to and during the arming and firing of the effect.
• Which flame effect group is defined for a long-duration installation where the governing use permit has a duration longer than 180 days?
• Before starting any flame effect, what key permit should be obtained when hot work is involved near the set?
• Which term refers to the device that produces flame patterns and configurations in flame effects?
• Which document issued by the AHJ authorizes the use of flame effects in a specific venue on a specific date and time or within a specified period?
• In flame effects safety, which term describes an area made hazardous by the flame effect that is normally accessible without deliberate additional access methods?
• Which term is used for equipment or materials that bear a label or symbol indicating compliance and are subject to periodic inspection?
• Documentation that is required to accompany flame effect construction materials includes which of the following?
• What safety interlock should be in place for a flame rig controlled by DMX?
• What should be done if a flame effect sensor reports a fault during a show?
• An attended, temporarily installed flame effect for a specific production with limited operation and fixed time for removal; automatic controls may be used; visual flame verification?
• A flame effect plan must contain which of the following?
• What should be included in an incident report after a near-miss or accident involving flame effects?
• Which term describes a condition where a device component’s failure creates an unsafe situation?
• Which factors influence the color temperature of a flame in flame effects?
• How can operator fatigue be mitigated during long performances involving flame effects?
• Which flame effect group requires supervision by a main show control system and a tech director with cast members in close proximity to the effect at the time of operation?
• What is a key component in a formal safety plan for flame effects?
• Which term is the last fuel shutoff valve before the flame effect burner?
• What control system component is used to prove that the ignition source is present (flame safeguard control)?
• Which flame effect group is defined as an installation of flame effects with a use permit duration longer than 180 days?
• Which group comprises manual controls for attended, manually controlled flame effects such as torches, candles, and matches?
• What term refers to the organization, office, or individual responsible for enforcing codes or approving equipment?
• Which term describes the manual action before arming that prepares the system?
• Which device is responsible for automatically shutting off fuel if the flame is lost?
• What is the recommended immediate action if you detect a gas leak during a setup?
• The complete assembly of interconnected components, devices, and/or appliances that provides all functions necessary to fuel, monitor, supervise, generate, and control flame effects, including emergency shutdown?
• During the post-operation period, what should a fire watch monitor?
• Which flame effect category describes a large or individual flame effect that is temporarily or permanently installed inside or outside a structure and is designed for intermittent or continuous operation under the supervision of a main show control system but without full-time supervision by a technician?
• Which action is the first step in a post-show shutdown procedure for flame effects?
• A flame effect that is supervised and fired by an automatic control system.
• In a well-controlled flame, which color typically indicates incomplete combustion and potential soot formation?
• Which term describes performers involved in a production that uses flame effects and may be employees?
• What is the purpose of NFPA 160 in theatrical flame effects?
• What is a consequence of allowing unvented combustion products to accumulate in a venue?
• What is the minimum age requirement for a Flame Effects Operator (FEO)?
• Which option is not a listed element of the outdoor flame effects design plan?
• What term describes equipment or materials included in a list published by an organization acceptable to AHJ and that states they meet designated standards or are suitable for a specified purpose?
• Which term designates the control system that supervises the flame effect operation?
• Group 3 flame effects are described as which of the following?
• Why should redundancy be implemented in critical flame effect systems?
• What is the purpose of a safety interlock test prior to a performance?
• How should you verify fuel and air supply pressures are within safe operating ranges?
• What does automatic interlock primarily ensure in flame effects safety?
• Which term is the safety mechanism that, when activated, stops all flame effects?
• Which term is the valve used to control the flow of fuel into an accumulator?
• Which term describes the plan that is used to convey information to the AHJ for evaluating a flame effect permit?
• Why are contingency plans and escape routes included in the safety briefing for flame effects?
• What is the role of a flame sensor in a DMX-controlled flame rig?
• What term refers to equipment or services included in a list published by a recognized organization indicating they meet standards or are suitable for a stated purpose?
• How can you minimize soot deposition in a flame effect system?
• Which of the following best represents the typical components of a flame effect ignition system?
• What is the role of the choreographer in flame effects safety?
• What is the purpose of lockout/tagout procedures in flame effects operation?
• How should a flame effects operator manage set timing with other departments during a cue?
• What term is used for something that is acceptable to the authority having jurisdiction?
• What is the purpose of a gas leak check and purge prior to ignition?
• What is the maximum allowable surface temperature in Fahrenheit for exposed skin due to incident radiation from a flame effects display?
• Which term refers to a burner designed to produce specific sizes and configurations of flames for flame effects?
• What is the role of a flame sensor in modern flame effects control?
• Which flame effect group is described as a large flame effect that is temporarily or permanently installed inside or outside a structure and operated under the main show control system with a tech director and proximate cast?
• Which term denotes a flame effect that is supervised and fired by an automatic control system?
• Which term refers to the valve that is the last fuel shutoff before the flame effect burner?
• During post-show shutdown, which action helps ensure equipment safety after operations?
• Temps of combustible materials shall not exceed what temperature rise above ambient after equilibrium is attained?
• What helps prevent accumulation of combustion products in a venue?
• The sequence of control system functions that result in the deliberate release of fuel for ignition.
• Which term refers to an area made hazardous by flame effects that is normally accessible to a person without deliberate additional access methods?
• A well-mixed propane flame typically appears blue. What does blue indicate?
• Which term refers to the safe shutdown of the flame effect in the event of the actuation of any flame effect primary safety control or limit switch?
• What term describes the space within a building where flame effects are used, intended to be used, or prohibited?
• Which term describes the integrated system that provides all functions to fuel, monitor, supervise, generate, and control flame effects, including emergency shutdown?
• Which term describes equipment or materials that bear a label or symbol acceptable to AHJ and are subject to periodic inspection?
• What is the name of the valve that is normally open, power closed, and located between the two safety shut off valves?
• Which standard is referenced for additional extinguisher requirements for temporary installations?
• A design plan for outdoor flame effects should include which of the following sets of elements?
• Which term is a circuit that, when actuated, results in the complete shutdown and extinguishment of all flame effects that are controlled by it?
• An installation of flame effects with a governing use permit lasting 180 days or less within a 12-month period corresponds to which term?
• Which flame effect group description includes 'attended' operation and cast proximity?
• Which term denotes a manual or automatic control system that supervises the operation of the flame effect?
• Why is wind speed a critical factor for outdoor flame effects?
• The emergency stop shall actuate automatically upon detection of which condition?
• What is a consequence of improper regulator sizing?
• A flame effect controller system is used for what purpose?
• Which class of fire extinguishers is typically suitable for propane/natural gas flame scenarios?
• Holding areas for flammable flame effect materials must meet which of the following?
• In a dilute air environment, how does flame color typically appear compared to clean air?
• AHJ stands for which of the following?
• In flame effects safety, what term describes the radiant energy reaching a person's exposed skin?
• How does the operator ensure that the flame effect does not cause damage to the audience or performers?
• Which safety principle minimizes risk when operating flame effects around props?
• What does PME stand for in flame effects safety protocols?
• Which practice is essential for the ongoing safety of flame effects equipment?
• Which aspect relates to the safe movement of people during a flame effects event?
• Which term denotes the manual action that precedes arming to prepare the system?
• When should a fire watch be posted during a flame effect sequence?
• Which term describes the failure of a device component, system, or mechanism that results in a situation that is immediately dangerous to life, health, or property?
• Name two maintenance activities that should be performed on flame effect equipment daily.
• Which safety measures are typical around outdoor flame effects to protect performers and equipment?
• What is a key precaution when using open-flame effects near wooden stage elements?
• For a temporary installation, what is the minimum number of extinguishers required for class 2A and class 10-BC, in addition to NFPA 10 requirements?
• In Group 3 flame effects, which feature is required?
• Which term defines the area made hazardous by the operation of the flame effect?
• In a flame effect plan, which item identifies the party responsible for the production?
• Which monitoring device is commonly used to verify that a flame has ignited and remains lit?
• What term describes a person who works under the supervision of the flame effect operator?
• Which term describes the fast closing valve that automatically and completely shuts off the fuel supply in response to a normal or safety shutdown?